Your Privacy Choices

Single Use Items

BRIEF ITEM DESCRIPTION

This item is used for the vast majority of our catalog. An important asset to ensure that you can do your methods without air leaking out. Very durable and should not break, tear, or malfunction as often.

Ensure that there is no damage on the black O-ring on the Male connector attachment.

Search for any holes or potential damages to the hose.

Make sure that no water is inside the hose as this can lead to rust in the Manual Handle and malfunctions in the Auto Device.

Make sure there is no lose fit on the Auto Pump device and the Manual Hand Gauge

Making sure that this component will allow for air to properly flow into the pump and keep pressure.

Ensure no tears or holes are on the 16 inch hose. This typically can result in a pop or air leakage.

BRIEF ITEM DESCRIPTION

Common pump you may see from vendors. One we will use for the time being until updates are made.

Simple, effective, and allows you a little more freedom.

Make sure to fully place the hose on the Auto Pump. Run a test on your finger or bare skin to see if pressure can be held. See additional pictures to determine if you have these issues.

Check the interior internal base for any blockage.

Verify the O-ring (typically the red/orange band) is tightly secured inside the rim of the pressure locking cup.

Make sure that to check for any openings on the device at the base. This will lead to pressure drops, hissing, overworked device, and incorrect pressure readings.

Used exclusively for protection of your testes. These prevent them from;

Being sucked into the tube
Aggressively pressed by extenders/pumps
Preventing turkey neck

Please see guide below:

If they ever feel uncomfortable, please remove.
Use for only 30 mins
Wear the rings with just enough tension as to not have them pull the testes. increase the size only when it is comfortable to do so.
Stop the use if you have any pre-existing pain in the testes.

1.125 x .4375 for the smallest ring

1.125 x .75 for the medium ring

1.125 x 1.125 for the largest ring

Starting from each respective end smallest → largest or vice versa.

Make sure you are taking time to progressively add each ring.

These are rendition of the typically blue sleeves many seller will have. We updated the material to help prevent some issues such as tearing and constant ripping.

We ask that you let us know when any issues may arise. We desire to help create solid products that you can enjoy.

We will add more variations overtime.

Updates will be listed on the page and title.

3 x .75

For anyone under 4 inches flaccid girth

3 x 1

For anyone over 4 inches flaccid girth

5.7 x 1

For anyone over 4 inches flaccid girth and 3 inches flaccid length

A simple device we sell currently. Can be used for play or PE.

Something to allow for a method known as soft clamping, created by a user known as sodium on the reddit platform.

This method typically requires you use a sleeve at the base of the penis.

Simply get erect and maintain your erection and apply one ring. After a minute, apply the second. This will increase vascularity of the penis and should increase sensitivity. Try not to perform any movements suck as 'edging' when doing this method. Gradually increase to 3 as you progress.

Adding this may help for some and may be a inconvenience for others. Always approach methods with caution.

Routine for this:

2 sets x 5 minutes (Only time after 2 rings have been applied)

3 sets x 5 minutes after 2-3 weeks

4 sets x 5 minutes after 1 month.

Again, gradually increase the rings to get to 3.

This is a marathon, not a race.

Largest - .8125 internal

Medium - .75 internal

Smallest - .6875

A common component found on silicone hoses of many shapes and colors.

Very simple item to have, but needs to be taken care of.

Ensuring that these components are taken care of will make each session a breeze.

If your male connector cannot enter the female and stay in, it may need to be replaced.

Make sure to periodically clean the hose and male connector. Blockages can occur with water pumping and/or oil build up.

Common item that is found at the top of the pump cylinder. Rarely does it get damaged.

Ensure the spring release is not engaged on the female connector. This being active can cause the male to attach and stay in the female connector.

Verify that t the top of the cylinder is adequately screwed in. You will not be able to pump if there is any leakage of the vacuum.

Taking off this component and cleaning can help. Sometimes bacteria can grow in the interior and cause bacterial infections. Cleaning the tube can protect you and your partner/s.

The bulk of the brand. Cylinders are the PE space bread and butter.

Who doesn't like a little more girth?

Be sure to repeatedly clean your cylinders as often as you can.

Any tears and breaks can be dangerous and should avoid using the device.

Pump sleeve base should protect against chipping as this piece will often break the most

Please contact us if you have any possible breaks in your cylinder. Fractures are dangerous and could lead to further breaks and possible shattering of acrylic into the flesh.

The best sleeves on the market. Not much can be said about these negatively. Made by one of our great partners FKN Mint.

Duramint sleeves are long lasting, stiff and form fitting with many size options.

Be mindful of any tears and holes. You can simply cover them up with any left overs if you want to save money, but it is ideal to contact us or Mint and we will fix any issues.

Pairs well with any and all cups from each brand.

Can be left on cups without issue.
Tough and durable
Pairs well with our regular sleeves
Can be used even when holes form while others may not be as durable.

Kits can make a difference or you can simply buy them on their own. Same instructions will apply for these sleeves!

Our newest edition and greatest extender. Appropriately priced, durable, and simple and clean design.

Simple to use and made by the very well named HonestPE. On his store he will offer more color options. Overtime we will like to add more options for our customer base.

When apply your cup you can make errors with which end the handle will end up on.

This extender comes with adjustable hook and clip in.

Weights are not painted on! Printed on for long term finish that is built to last. No pesky dust or fragile plastic from unknown origins. This extender is 100 percent US made!

HonestPE new extender comfort base. Added cushion to stop it from digging into the pelvis. When paired with ball stretcher, can help delay the dreaded turkey neck from forming.

When tracking, use a ruler to track the mm each use as this is the most efficient way to measure where you last "tapped out." Simply start with the 0 at the base nut on the extender and measure the bottom portion of the spring housing unit on the device.

With each twist you should get about 1 mm per rotation.

Track your workouts and start with low weights at 5-6 lbs.

Following the taping method by HonestPE and even Primewood can help you find some success! (Click names for links)

Start with 5 min sets with low weight. Gradually increase overtime.

The cheapest option vs an auto pump! This option will give your forearm a workout.

Pretty simple to use with the most control compared to the auto pump. Will be ideal to save cash and get the job done.

Stick with pressures 5-12 ingh or max at 300 mmHg.

WHEN STARTING. Stick with 5 inhg to 8 inhg of pressure. Slowly progress until you feel comfortable handling these pressures. First time users MUST stick with 5 as a max to ensure you can handle the pumping pressures. You are responsible for your OWN body. We have warned you.

2-5 minute sets of 2 can really help you adjust to these pumping pressures. Do 2 sets in your first week and gradually increase overtime. You should only need about 30 minutes a day.
Use lube ALWAYS, as these pumps can cause friction burns or blisters if you have thin penile skin.
Edema is normal as are purple to red dots forming after pumping. This is fairly common when starting.

Adjust any components on the handle if any air leaking or hissing occurs.

If any issues still occur adjust the other components and contact us if pumping does not work.

Verify you have a good seal at the base, shave/trim if you are a hairy HAIRY man.
Check internal O-ring inside the pump by unscrewing it just at the top most part.
Circle the pump at the base and slowly pump up as wrinkles at the testes can leave openings for air to leak out.

Hit the quick release button at the base if any pain or unpleasant sensations are felt.

Try to adjust the pump when necessary.

Malehanger is another partner brand who is tried and true! The community and others could vouch for it's success.

QR code can be found on the device or you can go to the site.

A how to guide for how to apply the device --> https://malehanger.com/how-to

All items come included in the packages, shipped in a box for discretion.

A new and improved variant of the standard pump base commonly found by other brands.

These are modified to fit the pump so you can have a much more effective session when pumping.

35 cm - 1.5/1.75

45 cm - 2.0

48 cm - 2.125/2.25

Be sure to clean the pump base after repeated use.

Another partner to the brand, Smarttract! This brand has the best the premium auto device used by many and considered the best of the best!

Privacy is included with each product!

Using their app and system can help automate your workout and help streamline sessions with ease.

They also allow for over the air updates for their device allowing you to get the best user interface and

Simple to use with a tutorial on how to use the device!

Pumps can be automated to do the work while you sit and relax.

A common item found by most vendors. This typically has very few issues other then air leaking out.

These will be updated over time to be altered from the top section.

A vacuum cup is needed for most issues with the cup. Be sure to buy one.

The spring can brake or become misaligned. Be sure to press the top in or ensure it's secured in place. Some air can leak out.

Do not keep blue sleeves on cups, try to remove after each session.

Our extended waist belt is a common issue you will see from other brands, but we are steadily redesigning and changing this item up to make it much more competitive.

Simple to use as it can be applied to any persons body and used for post extender work or as simple weight ADS routine.

Simply attach the belt to the waist, get your cup assembled and ready.

Attach to the hook and proceed to set a timer for 30 min sets of 2 starting out and ONLY continue when you feel nothing.

Ensure there is no damage to the hook.

A well known device to help stimulate your urges and free your hand. If you suffer from constantly choking your stick, give it a break (metaphorically speaking) and try our whirlwind device!

Keep it clean

Charge it after each use